If you are seriously looking for the best cat-5 cables for your network, it is time you chose the 1000 ft cat 5 Cable. This is perfectly complaint with the quality standards of the IEEE and UL specifications. You will find the installation procedures simple and faster. Configuration of the cable is possible with any of the net work cards of the present, previous and the next generation versions. Once you have installed the cable and configured it for the network card, you don’t need to worry about any dynamic fluctuations in the settings. The OS will take care of all the configurations after the physical installation of eh cable and the network card.
1000 ft Cat 5 Cable – The Construction
The construction of the 1000 ft cat 5 Cable is based on the 4 pairs of twisted cables which use the bare copper as the standard conduction medium. The resistance factor of the cable is kept at the minimum possible levels. Hence the speed and efficiency of data transfer will be the highest. The standard diameter of the cable is 26AWG. This comes to around 0.48mm.
- Installation Procedure: – The installation procedures involving the 1000 ft cat 5 cable starts with the crimping of the two ends. The first obvious part is at the server end. You have to install the operating system in the server, configure the network card and make the settings for the IP values. Then the connectivity with the network switch or the router happens. In most of the cases the switch is automatically recognized by the server operating system unless you are choosing version below Windows NT. Now the 1000 ft cat 5 cable spools have to be taken out and crimping procedure completed.
- Crimping Procedure: – Crimping is a procedure by which you attach the cable to the connector. This can also be done through punching. The 1000 ft cat 5 cable category has specific patterns in which the crimping ahs to be done. In many cases they are provided by the cable manufacturer. You need to follow the guidelines while pairing the colors. The generic principle of pairing is very simple. Use the same pairing combinations for all the 4 pairs at both the ends. This will solve the problem and keep the data flowing easily between the two ends.
- Cable Construction: – The basic benefit of 1000 ft cat 5 Cable is in its construction. The insulation material PE is capable of withstanding heat and humidity and work under extreme conditions. The material used for the jacket has a high flame resistance property. You will be able to use the 1000 ft cat 5 Cable at any of the locations like industries, high rise corporate buildings and large warehouse complexes with relatively simple installation procedures.
1000 ft Cat 5 Cable – Top Benefits
The data transfer speed of the cable can go up to the maximum levels according to the cat5 standards. The value of interference is kept at the lowest by the manufacturers of 1000 ft Cat 5 Cable.